manualshive.com logo in svg

SunSynk ECCO SUN-3.6K-SG05LP1-EU, Руководство пользователя

Поделиться
Скачать
SunSynk ECCO SUN-3.6K-SG05LP1-EU Скачать руководство пользователя страница 24

ECCO SG04LP1 | User Manual

24

4.10. Installing the CT Coil

The CT coil is one of the most important parts of the Sunsynk Ecco Hybrid Inverter. This device reduces the 
power of the inverter to prevent feeding power to the grid. This feature is also known as “Zero Export”.

 

ƒ

Fit the coil (sensor) around the live cable on the main fuse feeding the building and run the cable back to 

the inverter. 

If using an external meter, you can extend the cable for more than 10 metres. Plese consult 

the meter manual on distance.

 

ƒ

Connect the other end of the CT coil into the inverter terminals marked as CT coil.

If the CT coil is fitted in the wrong 
way then this variable will have neg-
ative instead of positive values when 
the power is flowing into the house/
inverter. Also, the inverter export 
limiting function will not work prop-
erly.

Содержание ECCO SUN-3.6K-SG05LP1-EU








































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды