17
4-5) Changing Sewing Pattern
4-6) Lower Thread Winding
A. Lower thread winding while sewing
B. Lower thread winding only
Thread as shown in the picture and wind the lower thread.
1) Press
to select the item “WINDER” .
※
If READY is on, WINDER is not selected.
2) Press .
3) Press the pedal switch to 2nd step.
Bobbin winder will start to wind.
4) Press the pedal switch to 2nd step again. Winding will stop.
5) Press
to end winding.
◀
CAUTION
▶
When using hole fixing device, if you shift to bobbin
winding mode and pres READY, the pin hole will go
down and the presser plate will move to the original
point.
READY
READY
SELECT
1) Press
(READY light will turn off).
2) Press
to display item “NO”.
3) Set (B) ~ (F) items in 4-2 and move to the item of
checking pattern shape.
SELECT
READY
During lower thread winding, the feed plate does not move but the needle moves. Therefore,
make sure no object is under the needle during the winding.
Caution
