-9-
1. STOP! Read the safety instructions mentioned above.
2. Make sure manual shutoff valve is fully open.
3. Depress control knob slightly and rotate clockwise
( ) to “OFF” position. Do not force. Wait ten
(10) minutes to clear out any gas.Then smell for gas,
including near the floor. If you smell gas, STOP!
Follow “B” in the safety information above. If you don´t
smell gas, go to the next step.
4. To light pilot, depress control knob slightly and rotate
counterclockwise ( ) to “P” position.
5. Depress control knob completely and, without releasing
knob,press piezo igniter button repeatedly until pilot is lit.
Setting “OFF”
OFF
1
2
P
Pilot
Burner
Setting “P”
OFF
1
2
P
Pilot
Burner
6. Continue depressing control knob for 30 seconds
after pilot is lit before releasing.
If knob does not pop up when released,stop and
inmediately call your service technician or gas
supplier.
7. Pilot should remain lit.
If the pilot will not stay lit after several tries,turn the
gas control knob to “OFF” and call your service
technican or gas supplier.
8. Two heat settings can be selected by slightly depressing
the control knob and rotating knob counterclockwise
( ) to positions 1, or 2.
9. When control knob has been rotated to the desired heat
setting,ensure control knob is locked into that heat setting
and cannot be rotate without being depressed.
Setting “2”
OFF
1
2
P
Setting “1”
OFF
1
2
P
