SunStar Fortuna series, Руководство пользователя

Страница: 23 / 86

24
(6) Method of Use: The Presser Foot-lift Location Selection Button When the Sewing Machine Stops
When the user turns the power on, one of the up stop or down stop lights in the program unit panel pressser foot-lift is always left on.
The user can change the stop location by pressing the button.
[ Caution ]
If the user uses the automatic up stop function of the presser foot-lift when the sewing machine stops while sewing, it may cause
damage to it because it has been left up for an unnecessarily long time. Be aware that to prevent the foot-presser solenoid from
being damaged, it is programmed to automatically come down when a certain amount of time passes.
When the machine stops while sewing, the
presser foot-lift stops at the top. When the machine stops while sewing, the
presser foot-lift stops at the bottom.
(7) Method of Use: Automatic Thread Trimmer and Wiper Selection Buttons
These buttons offer the function of automatic trimming and wiping after sewing. By pressing these buttons in sequence, the user can use
one of the following three functions. The light shows the function that is currently being used.
Automatic trimmer and
wiper do not operate Only automatic trimmer
function is operate Both automatic trimmer and
wiper operate
(8) How to use product counter and bobbin counter
Product and bobbin counters are functionalities available for Fortuna Series IV option type
To use the counter function, set the detailed functions under parameter B-Group.
When product counter and bobbin counter are not used
When product is set counter function
When is set bobbin counter function
Repeatedly press the ( ) button in the program unit to change the status of the lamp and functions as below.
How to set product counter and bobbin counter
A. Set/clear product counter and bobbin counter using the
button in the program unit
<When the lamp is off>
<When the lamp is on>
<When the lamp is flashing>