12
WARNING:
THERE MUST BE NO NAKED FLAMES IN THE AREA.
•
Lift the gas cylinder and tilting the bottom of cylinder away from you, hook the
bottom rim over the lower cylinder bracket as shown in the diagram.
•
Hook the hole of cylinder top rim over the top cylinder hook and check that the
cylinder is properly secured.
•
If changing the cylinder, ensure that the cylinder valve is turned OFF before
disconnecting the regulator / hose assembly at the cylinder.
•
INSTALLING THE GAS CYLINDER
WARNING:
CYLINDER MUST ALWAYS BE UPRIGHT DURING USE.
UNDER
NO CIRCUMSTANCES MUST AN LP GAS CYLINDER BE PLACED
DIRECTLY UNDER THE BARBECUE.
•
Ensure all burner valves on the front panel are in the OFF position.
•
When fitting the hose / regulator to the gas cylinder, ensure that it is free from
torsional (twisting) stress, kinks or sharp bends.
•
Protect the hose from dripping grease and do not allow it to touch any hot surfaces.
•
Attach the regulator to the gas cylinder.
•
Refer to the instructions supplied with the regulator for details regarding fitting.
•
Test for gas leaks. Do a leak test each time the cylinder is installed, whether it has
been refilled or not (see leak testing section). If the hose shows deterioration or
damage, leak test the entire outer surface while under pressure. Replace at first
sign of leak or age cracking. Remember to turn the cylinder valve OFF before
removing hose.
