9
36. Select “Next” –
Select “Next” ONLY AFTER the RTS product has
responded (motor jog or LED light kit slow blinks).
An RTS product has been added.
IMPORTANT: When adding an RTS product to a multi-TaHoma® system, scan the TaHoma®
QR code closest to that RTS product.
34. Find the remote that controls your SunSetter product.
•
Confirm that your remote is on the channel that operates your
SunSetter product.
Awnings and EasyShades are preset to operate on Channel 1.
LED Lights are set to operate on Channel 2.
•
Select “Next” on the App screen.
Note: RTS product must be paired to an RTS control point
(remote) before completing this step.
35. PRESS and HOLD the programming button on the back of the RTS
remote until the motor moves up and down briefly, or LED light
kit slow blinks.
NOTE:
Make sure both TaHoma® and RTS remote are in range of the
motor
. If the product does not respond, try again by moving closer to
the RTS product. Do not move to the next step until the motor
responds.
37. Test to ensure product is operational: select "Open" or "Close".
See Appendix A (pg. 17) for description of Open and Close
commands.
38. Select “Yes”.
39. Select “Finish” to complete the setup,
OR
Select “Add more devices” to add another product to create a
group channel.
To favorite the RTS product, select the “Star” icon.
To edit the product, select the “Pencil” icon.
To delete the product, refer to “Delete An RTS Product” in Appendix F.
Figure 21
Channel 1
Figure 22
Figure 23
