14
IV. SETTINGS
My Product:
Used to add, delete, and edit RTS products
1. From the TaHoma® app home page, select the Menu icon in the
bottom right corner.
2. Select “My Products”.
• Add RTS product (+ icon)
• “Favorite” an RTS product (star icon)
• Edit a product (pencil icon)
o
Device name
o
Add a device to this group
o
Remove a device from this group
o
Test the device (see note below)
• Delete a product (trash bin icon)
NOTE
: If the test button is pressed, and the motor is at the upper limit, the shade will move down after 5 seconds to
the lower limit.
If the test button is pressed and the motor is at the lower limit, the shade will move up for 5 seconds then back down
to the lower limit.
My Setup:
Used to configure the TaHoma®
1. From the TaHoma® app home page, select the Menu icon in the
bottom right corner.
2. Select “My Setup”.
• View TaHoma® PIN and Version.
• Name the Interface - Change the name of the TaHoma®
Interface.
• LED Brightness - Change the LED brightness. (0%-100%)
• Connection – shows connection type:
(Ethernet or Wi-Fi) and SSID of the network connected for
Wi-Fi
• Signal strength – Strength of the connected Wi-Fi Network
• Add Gateway (Add up to a maximum of 10 TaHoma® devices)
Figure 33
Figure 34
