1
Platinum Plus Semi-Cassette Awning Installation Instructions
WARNING: FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN PERSONAL INJURY!
WARNING: DO NOT REMOVE THE PLASTIC SAFETY SLEEVES FROM THE LATERAL ARMS UNTIL INSTRUCTED TO
DO SO.
WARNING: NEVER ATTEMPT TO REPAIR OR DISASSEMBLE ANY PART OF THE AWNING WITHOUT FOLLOWING
REPLACEMENT PART PROCEDURES SUPPLIED BY THE MANUFACTURER. TRYING TO DO SO WITHOUT PROPER
INSTRUCTIONS COULD RESULT IN PERSONAL INJURY!
Before Starting
Before beginning, please familiarize yourself with the components of the Awning as shown in
Figure 1
, and the
supplied fasteners/parts shown on
Pages 4
and
5
. Find the Mounting Brackets (wall or soffit) in the package
(they are separated from the Awning itself).
Helpers Needed
Use the Awning Weight Chart on
Page 10
to determine how much help is needed to safely lift the Awning into
the wall or soffit Brackets.
Awning Left End
1
Note: This figure shows Awning with Motor
installed on the right side as you face the house.
Note: Number of Brackets supplied with the Awning
will vary (minimum of 4, maximum of 6) depending
on Awning size. See Parts List on page 4.
Awning Middle Point
3
Figure 1
Right
Roller
Bracket
Left
Roller
Bracket
Valance
Front Bar
Awning F
abric
Location
(
a
)
Location
(
g
)
Location
(
f
)
Location
(
e
)
Location
(
d
)
Location
(
c
)
Location
(
b
)
Square Bar
Crank Loop
Left Arm Clamp
2
Right Arm
Clamp
4
Awning
Right End
5
Motor or Gear
Assembly
Wall
Brackets
Right Lateral Arm
Roller Bar
Accessory Slot
Rafter
Adapter
Mounting
Hardware
Roof
House
Roof
Rafter
(Exposed)
Soffit
Bracket
Soffit
Mounting
Hardware
Note: Optional
Soffit Bracket
shown here.
Rafter Adapter
Bracket Shown
(not included with
Soffit Bracket)
