22
APPENDIX A
ADJUSTING THE OPEN AND CLOSE STOP LIMITS
FOR THE MOTORIZED AWNING
If a preset Open or Close stop position needs to be changed, but the Awning cannot stop automatically at
that position, possibly due to an obstruction such as a tree or shed being in the way, then see Appendix D on
Page 26 to clear the motor of preset stop positions and set new Open and Close stop positions.
TO CHANGE THE OPEN LIMIT:
1. Select the correct Channel. The Remote was preset to operate on Channel 1.
2.
Open the Awning to its current Open position and
let it stop on its own
.
3.
Press and Hold the OPEN
and CLOS
E buttons simultaneously until the
Awning moves a little bit, or jogs back and forth, then release the buttons.
4.
Adjust the Awning to the new Open limit position. The awning moves only
while pressing the OPE
N or CLOS
E button.
5.
Press and Hold the “my” button until the Awning moves a little bit, or jogs
back and forth, then release the “my” button.
6.
Check the new Open limit.
TO CHANGE THE CLOSED LIMIT:
1.
Close the awning to its current Closed position and
let it stop on its own
.
2.
Press and Hold the OPE
N and CLOS
E buttons simultaneously until the
Awning moves a little bit, or jogs back and forth, then release the buttons.
3.
Adjust the Awning to the new Closed position. The awning moves only while
pressing the OPE
N or CLOS
E button.
4.
Press and Hold the “my” button until the Awning moves a little bit, or jogs
back and forth, then release the “my” button.
5.
Check the new Closed limit.
CLOSE
OPEN
my/STOP
Channel Selector Button.
•
Press to identify active Channel.
•
Press while light blinks to
change Channel.
Channel
Indicator
Lights.
OPEN POSITION
When Open, the Lateral Arms are slightly bent
and the Fabric is snug.
The Fabric should be rolling over the top of the
Roller Bar (see Figure 23), not underneath (See
Figure 24). If the Fabric is rolling from the bottom
of the Roller Bar, continue unrolling the Fabric
until it rolls over the top of the Roller Bar. Then
roll up the Fabric until both the Lateral Arms
bend slightly and Fabric becomes tight.
Figure 23
Figure 24
CORRECT
INCORRECT
Fabric
Fabric
Deck
Deck
CLOSE POSITION
The Awning should close to where the Front
Bar is under the Housing. See Figure 25.
Front
Bar
Arm
Clamp
House
Figure 25
Housing
Front Bar should
be under Housing
