SunRotor Solar Pump Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 36

SunRotor Solar Pump Скачать руководство пользователя страница 4

Page 3

www.sunrotor.com

1

I

NTRODUCTION

To gain the maximum level of service and satisfaction from your pumping system, please carefully
read the contents of this guide before installation. Should any questions arise after reading through
this installation guide, please contact your local Authorized SunRotor

®

Dealer, or call the SunRotor

®

Technical  Service  Team  at  1-580-303-4015.  Follow  all  appropriate  state  and  federal  electrical  codes.
Please read through the warranty information carefully before installation. Check the depth limits for
your custom panel/pump configuration.  Depth limits can be found on the  pump data sheets.  If at
any  time,  additional  copies  of  this  installation  guide,  warranty  information,  or  data  sheets  are
needed, they may be obtained on the SunRotor

®

website under the Downloads section or directly by

visiting

www.sunrotor.com/downloads

.

© 2014 Copyright by Solar Power & Pump Company, LLC. All Rights Reserved.

R

EGISTRATION

F

ORMS

Please look through the following form and fill out before, during, and after as needed. This form is
necessary to

REGISTER YOUR WARRANTY

. The information provided will assist in fixing or

troubleshooting  any  future  technical  issues,  as  well  as  provide  the  proper  background  information
should  any  repairs  or  replacements  be  needed.    Please  make  a  copy  of  this  form  to  keep  with  the
pump  records.    Listed  below  is  the  mailing  address  where  the  registration  form  can  be  sent.
Alternatively, the form can be filled out electronically by visiting the link provided below.

Mailing Address:

Solar Power & Pump Company

301 W 12

th

St.

Elk City, OK 73644

Online Registration:

www.sunrotor.com/warranty-registration

Thank you for your assistance and participation. If we can be of any further assistance, please call us
at 1(866) 246-7652, e-mail one of the following e-mail addresses, or use the contact form provided on
the website:
Technical Service:

[email protected]

General Information:

[email protected]

Contact Form:

www.sunrotor.com/contact

The SunRotor

®

Solar Products Team

«
...
2
3
4
5
6
...
»

Содержание Solar Pump





































Отзывы:

Нет отзывов