Sunrise Medical Whitmyer DFSQ1 Скачать руководство пользователя

Страница: 35 / 40

ADJUSTMENT - HEIGHT AND ANGLE:

1. Height Adjustment - Loosen the mounting

bolt (B), sliding the HEDZ-UP assembly up or

down. Retighten.

2. Angle Adjustment - Loosen the left and right

strap bracket adjustment bolts (C). Equally

adjust the bracket angles. Retighten both bolts

insuring the brackets are secure and at the

same angles.

ADJUSTMENT - STRAP SIZE:

1. Strap size adjustment (Note: the strap cover

has been pushed to side in this view- Warning -

The cover must be in place to supply padding to

the forehead). Slide the strap cover (F) to expose

the hook and loop plastic strap. Separate and re-

fasten the hook and loop fasteners (E) adjusting

the overall strap size evenly on both sides.

WARNING!

Consult with a qualified therapist or rehab technology supplier trained in postural

positioning before installing or adjusting this product.

Read and understand all instructions and warnings before using the product.

Installation:

Using a 3/16” Allen® wrench:

1. Loosen the rear occipital screwball (A), adjust up or down

to provide slot access.

2. Remove the bolt and washer (B) from the HEDZ-UP mount-

ing bracket.

3. Fit the mounting plate to the front of the occipital plate

slot as shown.

4. Replace the bolt and washer (B).

Note: Adjust the strap to allow a space of one or two fingers between the user’s forehead and the

strap allowing the user freedom of movement.

USE INSTRUCTIONS:

The HEDZ-UP strap will flip up (G) for transfers or periods of non-use and flip down to assume the

same position each time.

MAINTENANCE & LAUNDRY INSTRUCTIONS:

Periodically check the overall condition of the HEDZ-UP and immediately retighten loose

fasteners or replace damaged parts.

Washing Instructions - Remove and hand wash the strap in mild detergent. Allow to air dry.

Replace cover if worn or ripped.

Plastic Strap - Replace strap at the first signs of wear, ripping or cracking.

Whitmyer Head Supports

HEDZ-UP Static Forehead Strap Adjustment

MKT6100 Rev. C

Содержание Whitmyer DFSQ1









































Результаты поиска

Содержание Whitmyer DFSQ1

Отзывы:

Похожие инструкции для Whitmyer DFSQ1

Бренды по названию

Популярные бренды

Sunrise Medical Whitmyer DFSQ1, Руководство по обслуживанию

Результаты поиска

Содержание Whitmyer DFSQ1

Отзывы:

Похожие инструкции для Whitmyer DFSQ1

Бренды по названию

Популярные бренды