1. Assemble and position as shown in Fig.1. Index pin on anti-rotational collar
(Fig.1,C) fits in to slot in top of detach receptacle (Fig.1, D) to prevent rotation.
2. See pages for pad and accessory attachment / adjustments:
Pad(s)- page 15
Anterior Supports – page 17, 22-23
Base plate assembly – page 16 Lateral Supports – page 18-19
Adjustments
1. Vertical - Loosen the lever knob (Fig. 1, E) and adjust to the proper height and then
lower the stop collar (Fig. 1, C) be sure to align the index pin in the slot on the detach
mount. (Fig. 1, F) Vertical rod may be rotated for additional angle adjustment of pad/
base plate assembly.
2. Horizontal / Vertical – Loosen clamp screws (Fig. 1, A & B) for depth and height
adjustment (Fig. 2).
3. Tighten all collar screws evenly to reach full locking strength. See page 15.
Fig. 1
Fig. 2
Fig. 3
A
B
C
D
A
B
E
F
Whitmyer Head Supports
LINX Mounting System
11
MKT6100 Rev. C
