Sunrise Medical Quickie XENON2 Скачать руководство пользователя

Страница: 27 / 32

XENON2

N. BACKREST TENSION ADJUSTABLE

IX. DEALER SERVICE AND ADJUSTMENT

Back Angle Adjustment

Remove the

bolt

(1).

Move the backrest to the desired angle then reinsert the

bolt.

Tighten screw to proper torque 44 in-lbs (5 Nm).

nsure that both sides are set to the same angle.

Height Adjustment

The backrest may be set to various back heights, in 1"

(25.4mm)

steps (5 adjustment ranges: 10 - 12",

12 - 14",

14 - 16",

16 - 18", and 18 - 19").

Remove the side pads of the upholstery and if necessary the

backrest belt covering the screws.

Remove the screw (1) and set the backrest to the desired

height, then tighten the screws again.

Ensure that both sides are set to the same height.

BACKRESTS

72 73

WARNING

Please take into account the altered center of gravity when setting the angle

of the backrest.

The more you change the angle, the more likely the chair

will tip over backwards. Always make adjustments in small increments, and

check the stability of the chair with a spotter to prevent a tip-over. We

recommend that anti-tip tubes are always used in conjunction with this type

of adjustment.

Moving the center of gravity to the front will lighten the force required to turn

the chair. The further back the axle, the more stable the chair becomes.

Z-

FINITY

™

FOOTREST SYSTEM

(

Continued

)

Height range adjustment (Extension Mount Footrest)

Loosen set screw (F).

Slide footrest extension tube up or down inside frame tube to

desired height.

Tighten set screw to proper torque 44 in-lbs (5 Nm).

Note: It is normal for the elastic components in this joint to

relax, resulting in a lower torque setting then initially set.

245243 Rev. D

To install the Backrest Tension Adjustable

Tighten the straps appropriately to desired tension level. DO NOT

over

tighten straps as

this will cause undue strain upon the chair

frame.

The difference in width between the top and bottom of the

backrest should not /- 0.5” (+/- 13mm).

Содержание Quickie XENON2

































Результаты поиска

Содержание Quickie XENON2

Отзывы:

Похожие инструкции для Quickie XENON2

Бренды по названию

Популярные бренды

Sunrise Medical Quickie XENON2, Руководство пользователя

Результаты поиска

Содержание Quickie XENON2

Отзывы:

Похожие инструкции для Quickie XENON2

Бренды по названию

Популярные бренды