a.
Tighten screw (1) firmly on the outer side.
b.
By removing the clips (2) the footplate can be adjusted to three different
positions toward both the front and rear.
c.
Loosen the adjustment screw (3) to change the horizontal position of the
footplate. To do this, the footplate must be flipped up.
d.
When finished, ensure that all screws have been tightened to 44 in-lbs (5 Nm).
Note:
It is normal for the elastic components in this joint to relax,
resulting in
a lower torque setting then initially set.
IX. DEALER SERVICE AND ADJUSTMENT
XENON2
2
5
62
6
4
63
J. PLATFORM FOOTPLATES
62
63
6
4
The foot board can also be tilted to six different angles relative to a level surface.
1. Angle Adjustment
NOTE-
It is recommended that you maintain a minimum of 2
"
(51mm)
between the
lowest point on the footrest and the ground.
6
5
2.
High Mount Platform Footplate Adjustment
6
5
NOTE-
It is recommended that you maintain a minimum of
2"
(51mm)
between the
lowest point on the footrest and the ground.
a.
Loosen clamping bolts (A) using hex key.
b.
Slide footrest extension up or down inside frame tube to desired height.
c.
Tighten clamping bolts.
A
245243 Rev. D
Содержание Quickie XENON2
Страница 31: ...NOTES XENON2 31 245243 Rev D...
