Sunrise Medical Quickie XENON2 Скачать руководство пользователя страница 14

VIII. USE AND MAINTENANCE

When checking axles and axle sleeves every six months, make sure 

they are clean and tight.

Loose sleeves will damage the axle plate and will affect 

performance.

D. CLEANING TIPS

1. Paint Finish

a. Clean the painted surfaces with mild soap or detergent at least

once a month.

b. Protect the paint with a coat of non-abrasive auto wax every 

three months.

2. Axles and Moving Parts

a. Clean around axles and moving parts WEEKLY with a slightly 

damp (not wet) cloth.

b. Wipe off or blow away any fluff, dust or dirt on axles or moving 

parts.

3. Upholstery

a. Hand-wash (machine washing may damage fabric).

b. Drip-dry only. DO NOT machine dry as heat will damage fabric.

4. Basic Maintenance Materials available at local store

a. Tire Pump

b.

Tire pressure gauge.

c. Clean rags or cotton cloth.

d. Teflon-based Lubricant

e. Mild Detergent. 

NOTE– You do not need to grease or oil the chair.

14

XENON2

WARNING

The owner of this chair is responsible for making sure that it 

has been setup and adjusted by a trained service professional 

under the advice of a healthcare advisor.  The chair may 

require periodic safety and function checks or certain tool free 

adjustments that can be performed by the owner, caregiver or 

authorized dealer if desired.  Always use parts and/or 

accessories that have been recommended or approved by 

Sunrise Medical when servicing this chair.

1. Tire Air Pressure:

Check air pressure in pneumatic tires at least ONCE PER WEEK.

The wheel locks will not grip properly if you fail to maintain the

air pressure shown on tire sidewall.

2. Axles & Axle Sleeves:

   

   

Weekly

    

    

   

    

   

    

3 Months

   

    

   

6 Months

    

Annually

 

Tire inflation level

 

Wheel locks

         

Visually check for loose hardware

Armrests

Axle and axle sleeves

         

Quick-release axles

         

Wheels, tires and spokes

         

Casters

         

Anti-tip tubes

Frame

, camber tubes, 

and crossbrace

         

Upholstery

      

Service by Authorized 

Dealer

Safety & Function Check

 

Make sure tire pressure is correct and 

equal in both rear tires and front 

caster tires, if pneumatic.

   

   

   

    

Make sure all nuts and bolts are tight.

Make sure all spokes and nipples are 

tight on radial spoke wheels.

Use Tri-Flow Lubricant (Teflon®-based) 

between frame connections and parts.

 

Check for proper caster fork 

adjustment. See instructions for 

caster adjustment.

 

Symptom

    

   

Left turn in chair

    

   

Right Turn in chair

    

    

   

Looseness in chair

    

    

   

Sluggish turning

   

    

    

Squeaks and rattles

    

    

Caster flutter

Solution

E. TROUBLESHOOTING CHART

A. INTRODUCTION

1. Proper maintenance will improve performance and extend the 

useful life of your chair.

2. Clean your chair regularly. This will help you find loose or worn 

parts and make your chair easier to use.  You will need a mild 

detergent solution and plenty of cleaning rags.

3. If discovered, repair or replace loose, worn, bent or damaged 

parts before using the chair.  ALWAYS be sure to use Parts and/

or accessories that have been recommended or approved by 

Sunrise Medical.

4. To protect your investment, have all major maintenance and 

repair work done by your authorized dealer.

5. Inspect and maintain this chair strictly per the maintenance 

chart.

6. If you detect a problem, make sure to order parts, or have 

service, and repair work done at your authorized dealer before 

use.

7. At least once per year, have a complete inspection, safety 

check, and service of your chair made by an authorized dealer.

B.

SAFETY CHECKLIST

C. CRITICAL 

SAFETY CHECKS

NOTE - The user or caregiver should perform these weekly and 

monthly checks to maintain the safety of their chair. If an item 

is not working properly, please contact your authorized dealer. 

Monthly

245243 Rev. D

Содержание Quickie XENON2

































Отзывы: