Issue 10
72
Lap belt instructions
To fasten and release the lap belt follow
the relevant instructions for your lap belt
as detailed below ;
To fasten buckle:
Firmly push male buckle into female
buckle
To release belt:
Press exposed side of male buckle and
push towards centre/ push the press
button of the female buckle whilst gently
pulling apart
Do not rely on the lap belt only when the
wheelchair and occupant are transported
in a vehicle, use the separate occupant
lap and diagonal restraints provided in
the vehicle.
Advice to Client
The lap belt must be checked on a daily
basis to ensure it is adjusted correctly
and it is free from any obstruction or
adverse wear.
Failure to make sure that the lap belt is
secure and adjusted prior to use could
cause serious injury to the user. E.g. too
loose a strap may allow the user to slip
down in the chair and risk suffocation.
Maintenance
Check lap belt, and securing
components; at regular intervals for any
sign of fraying or damage. Replace if
necessary.
Clean the lap belt with warm soapy
water and allow to dry.
Note
The lap belt should be adjusted to suit
the end user as detailed aboveSunrise
Medical also recommend that the length
and fit of the belt is checked on a regular
basis to reduce the risk of the end user
inadvertently re-adjusting the belt to an
excessive length
If in doubt about the use and operation
of the seat belt then ask your healthcare
professional, wheelchair dealer, carer or
attendant for assistance