Issue 10
46
Using a crutch holder.
Your crutch holder (see fig 48) should be
fitted by an authorised Sunrise dealer to
the lower section of the push handle. A
Velcro strip should also be fitted to the top
section of the push handle and on at relevent
position on your crutch.
Take your crutch and drop it into the cup
fitted to the bottom of the push handle. Line
up the Velcro strip on the push handle and
cruth and push together, firmly fixing the
crutch to the chair. See Fig. 49.
Crutch holder
(optional extras)
WARNING
Make sure that the crutch is securely fastened
to the crutch holder.
Make sure that the crutch is not interfering
with the mechanisms of the chair.
Make sure that the crutch does not protrude
from the chair.
Do not attempt to remove the crutch whilst
the chair is in motion.
Always come to a complete stop and
turn off the power to the controls before
attempting to remove the crutch. This will
avoid accidentally operating the chair.
Cup
Velcro
strip
Fig. 49