Issue 10
70
Lap belt instructions
Before using your wheelchair ensure
the seat belt is worn and correctly adjusted
before use.
For the standard F55 Seat option the
lap belt is fitted around the backrest
tube. The belt should then be run across
the outside of the back upholstery in
between the armrest and backrest.
It is important that the belt is routed
around the back of the wheelchair. The
buckle end can be fed between the armrest
and backrest.
Adjust the belt position so that the buckles
are in the centre of the seat.
5.3 Lap belt – Fitting the standard Lap
belt
5.3a Lap belt – Fitting the Aircraft Buckle
lap strap to Recaro Seat
For the Recaro seat use the 50mm
Aircraft buckle lap strap shown in Fig 1.
Place the strap loosely across the seat
with the opening end of the buckle
facing to the right for a left handed
person and to the left for a right-handed
person. Pass the bolt through the plain
washer and strap bracket and place the
saddle washer on the bolt, as shown in
Fig 2.
Pass the bolt through seat frame as
shown in Fig 3 and place the other
saddle washer on the end of the bolt
and against frame. Fit plain washer and
nut.
Fig 1
Fig 2
Fig 3