Sunny Health & Fitness SF-T7820, Руководство пользователя

Страница: 9 / 21

9
MAINTENANCE & CARE
General cleaning will help prolong the life and performance of your treadmill. Keep the unit clean and
maintained by dusting the components on a regular basis. Clean both sides of the running belt to
prevent dust from accumulating underneath the belt. Keep your running shoes clean so that dirt from
your shoes does not wear out the running board and belt. Clean the surface of the running belt with a
clean damp cloth.
To better maintain the treadmill and prolong its life it is suggested that the machine be powered off for
10 minutes every 2 hours and fully powered off whenever not in use.
A loose Running Belt will result in the runner sliding off when running, while too tight of a Running
Belt will negatively affect the motor’s performance and also create more friction between the roller
and running belts. The most suitable tightness for the belts is pulled out
50-75mm from the Running
Board.
CENTERING THE RUNNING BELT:
Place the treadmill on level ground and set it at 3-5mph to check if the Running Belt (No. 65) drifts.
1. If the Running Belt (No. 65) moves
to the right, turn the adjusting bolt on
the right side
¼ turn clockwise , then
turn the left adjustment bolt ¼ turn
counter-clockwise . If the belt does not
move, keep adjusting ¼ turn at a time
until it centers. Refer to Figure A.
2. If the Running Belt (No. 65) moves
to the left, turn the adjusting bolts on
the left side
¼ of a turn clockwise , then
turn the right adjustment bolt ¼ turn
counter-clockwise . If the belt does not
move, keep adjusting ¼ turn at a time
until it centers. Refer to Figure B.
3. Over time the Running Belt (No.
65) will loosen. To tighten the belt turn
the Left & Right side adjustment bolts
one full turn clockwise , check the
tension of the belt. Continue this
process until belt is at the correct
tension. Make sure to adjust both sides
equally
to ensure correct belt
alignment. Refer to Figure C.