13
EXERCISE COMPUTER
KEY FUNCTIONS:
MODE:
Press this button to change the display or to choose a program.
SET:
In the setting mode, press this button to increase the setting value for
TIME,COUNT, and CAL.
RESET:
1. In setting mode, press this button to reset the value for TIME, COUNT, and CAL.
2. In monitor mode, hold this button for 3 seconds to reset all values to zero.
FUNCTIONS:
SCAN:
Press
MODE until “SCAN” appears, the computer will rotate through all the 4 functions: Time, Count,
Calorie,Total Count. Each display will be held for 6 seconds.
COUNT(CNT):
1. Display
’s an instant count with a range from 0 ~ 9999COUNT.
2. The count value can be set in advance, when it approaches the preset count, the computer will
beep for 10 seconds.
TIME:
1. Count the total time from exercise start to the end with a range from 0:00 ~ 99:59M
2. Exercise time can be set in advance, when it approaches the preset time, the computer will beep
for 10 seconds. The maximum pre-set time is 99 minutes.
CALORIES(CAL):
1. Count the total calories consumed from exercise start to the end with a range from 0.0 ~ 9999CAL.
2. The calorie value can be set in advance, when it approaches the preset calorie, the computer will
beep for 10 seconds.
TOTAL COUNT(TOTAL):
The count total will display after installing the batteries. The range is from 0 ~ 9999COUNT.
AUTO ON/OFF & AUTO START/STOP:
1. When there is no signal of exercise or operation for 4 minutes, the power will turn off automatically.
2. Once motion begins, the computer will turn on automatically.
SET
RESET
MODE
