7
12 1PC
12*1.2 1PC
33* 8*13 1PC
STEP 4:
Insert
Seat (No. 45)
to
Iron Rail (No. 35)
.
Attach
Foot Pad (No. 40)
to
Iron Rail (No.
35)
with
Screw (No. 42)
and
Washer (No.
41)
. Tighten and secure with the
Spanner
(No. A)
.
STEP 3:
Remove 4
Screws (No. 60)
from
Shaft
Sleeve Combination (No. 76L/R)
with
Spanner (No. A)
.
Put
Rowing Rods (No. 79)
into
Shaft
Sleeve Combinations (No. 76L/R)
with 2
Bolts (No. 77)
and 2
Nuts (No. 72)
. Tighten
and secure with
Spanner (No. D)
.
Note:
The
Bolt (No. 77)
is D shaped. Make sure to
match the D shaped bolt head to the flat
side of the limit slot and insert as shown in
figure B.
Note:
Please check if
Rowing Rod (No. 79)
rotates smoothly. If not,
Bolt (No. 77)
and
Nut (No. 72)
are locked too tight. Adjust
Nut
(No. 72)
with
Spanner (No. D)
to make the
rotation smooth.
Put
Rowing Rods (No. 79)
on
Rowing Rod
Pads (No. 9L/R)
. Put 2
Covers (No. 71)
into
Shaft Sleeve Combination (No. 76L/R)
with 4
Screws (No. 60)
that were removed.
Tighten and secure with
Spanner (No. A)
.
