21
Figure
A
DISMOUNTING THE BIKE
WARNING! Do not dismount the bike or remove your feet
from the pedals until the pedals have stopped completely. You
can stop the flywheel at anytime by pushing down on
Brake
Knob (No. 31)
.
ADJUSTING THE HANDLEBAR
Loosen the
L Shaped
Knob (No. 16)
to raise or lower the
Handlebar (No. 26)
to the desired position. Make sure the
L
Shaped
Knob (No. 16)
settles into the desired hole and
secure it firmly by turning
clockwise
. See
Figure A
.
Loosen the
L Shaped Knob (No. 27)
to move the
Handlebar
(No. 26)
forward or backward to the desired position. Once
the
Handlebar (No. 26)
is in the desired position, firmly
secure the
L Shaped Knob (No. 27)
by turning
clockwise
.
See
Figure B
.
ADJUSTING THE PEDAL STRAP
Place the ball of each foot in the toe clips so the front of your
shoe fits snugly in the toe clip cage. Rotate one foot to within
arm’s reach and pull the strap until the top clip cage fits your
shoe snugly. Insert the strap back into the hoop of the toe clip.
Repeat this for the other foot.
MOVING THE BIKE
To move the bike, first ensure that the
Handlebar (No. 26)
is
properly secured. If the
Handlebar (No. 26)
is loose, tighten
the
L Shaped
Knobs (No. 16 & 27)
to secure it. Next, stand
at the front of the bike so that you’re directly in front of the
Handlebar (No. 26)
. Firmly grasp and hold each side of the
Handlebar (No. 26)
, place one foot on the
Front Stabilizer
(No. 2)
and tilt the bike towards you until the transportation
Wheels (No. 11)
on the
Front Stabilizer (No. 2)
touch the
ground. With the
Wheels (No. 11)
on the ground, you can
transport the bike to the desired location with ease.
Figure B
Содержание SF-B121021
Страница 6: ...5 EXPLODED DIAGRAM 1 ...
Страница 7: ...6 EXPLODED DIAGRAM 2 ...
Страница 64: ...63 ...