© 2019 Sunman (Zhenjiang) Co., Ltd. All rights reserved. Specifications included in this manual are subject to change without notice.
www.sunman-energy.com
version 2019A page 11 / 18
TM
•
Layout for rail mounting
▶
Note:
•
Please refer to appendix regarding Kliplok 406-like and Kliplok 700-like roof sheeting mounting.
•
Please contact the local distributors if you are not sure whether your color steel roofing is suit for SMD
Series or you have any question about this installation method.
•
Please contact the local distributors if you want to remove SMD Series from your color steel roofing.
•
Do not install using quick bonding method when rain is present
•
Do not install using quick bonding method when wind speeds greater than 10m/s are present at the
site within 24 hours
•
Roof and ambient temperature during installation shall be between -15
℃
and 45
℃
during application
•
If installation method is strictly adhered to, Sunman will provide a 10 year warranty for the Tonsan 1527
Framed Installation
▶
For SMA Series
SMAxxxM-6X12DW, SMAxxxM-6X10DW, SMAxxxM-4X12DW, SMAxxxM-4X09DW
SMAxxxM-6X12UW, SMAxxxM-6X10UW, SMAxxxM-4X12UW, SMAxxxM-4X09UW
•
Clamps can be used for the connection of SMA series components and support system. The
installation must be completed according to the following example, otherwise the warranty will be
invalid.
•
Horizontal installation of SMA series components.
