Sunload MultECon Series M60, Руководство и гарантия, Страница: 9 / 32

9
Which solar panel fits to M60?
This M60 device was especially designed to work highly efficiently with
different solar panels.
The connector must be a DC plug (round hollow type 5.5 x 2.1).
Be careful when using modular adapter plugs from other manufactures! They may have
the inverse polarity!
The acceptable solar input voltage (
Solar IN
) of the M60 is limited to 30V.
Please note that the open-circuit voltage of the solar panel must be lower than 30V;
otherwise the M60 will be damaged!
As regards the size of the panel, please note that the maximum power of the
device may process amounts to 30 W. Above an input power of 30W the char-
ge current will automatically be limited.
Depending on the weather conditions,
we recommend using solar panels with a peak power from 30 to 62 Watt. Higher
panel power will not accelerate the charging process.
But it gives you an output
reserve if the conditions are not perfect.
Please note, that even a minor shadow on the solar panel surface consider-
ably reduces its power.
Duration of a charging process in practice
The nominal capacity of M60 is equate to standard notebooks. When using a
SUNLOAD solar panel 62 Wp (flexible and foldable) for a complete charging
you need at least 3h provided that the sky is clear and the panel is orientated
to the sun.
If you have cloudy weather conditions and you use only a 30Wp panel the
time for a complete charging can increase up to 8h - 10h.