Sunload MultECon Series M60, Руководство и гарантия, Страница: 19 / 32

19
1
Open the accu box
2
Place the accus that need to be charged in the battery port. Install
the batteries following the + symbols next to the battery contacts.
3
Close the accu box until you hear it click into place. Ensure hat the
lead is lying in the groove and that it is not trapped by the accu box
cover, as this may damage the lead.
4
Switch on your M60 by press and hold the main button ON for 2s.
5
Press and release the button for accu box CHECK to start the char-
ging process. The button lights up.
6
When all of the accus in the acco box are fully charged, the charge
regulator shuts off automatically. If the accu box is opened while
accus are being charged, the charging process is interrupted.
To finish the charging process wake up the M60 if necessary from
the energy saving mode by press and release the main button
ON
.
Than switch off the accu box by press and release the button for
CHECK
or switch off the whole M60 by press and hold the main
button
ON
for 2s.
Do not recharge accus that are fully charged. If you do so, the accus may become
overcharged, which may result in the accus being destroyed. You should therefore remove
fully charged accus from the accu box as a precaution.
1
3 2