24
Trouble shooting
When unforeseen events occur, e.g. a lead breaks, the casing gets damaged, so-
mething spills on the casing or electronics, please contact the technical support.
Problem
Cause
Solution
The casing or lead is
damaged.
Send to technical support.
The M60 and electronic
components are wet or
something has been spilled
on them.
Remove the internal Li-Ion battery
and the accus out of the M60
and allow all parts to dry under
ambient conditions for two days.
If this procedure fails send the
M60 to the technical support.
Please press the main button
ON
when experiencing any operating problems.
1)
The green LED on the
internal battery indicator
Accu
fails to light-up
when you press the main
button
ON
.
Internal battery discharged.
a) Charge internal battery with
DC IN
b) Contact technical support if
unsuccessful
1.1)
The internal battery
is not being charged
from a12 V power source
connected to
DC IN
.
More than 0.5 A are passing
through the output ports.
(
USB OUT
,
12V OUT
,
accu box).
Shut-off one or more of the
output ports (
USB OUT
,
12V
OUT
, accu box).
1.2)
Problem similar
1.1)
The power adapter could be
faulty, the fuse of the 12V
car adapter cable could be
damaged or the power source
is not activ.
Check that the external power
supply is functioning properly.
1.3)
Problem similar
1.2)
M60 is defect.
Send M60 to technical support.
2.1)
The Indicator of the
acco box fails to light-up
when you press the
CHECK
button.
There are no accus in the
accu box.
Install NiMH accus for charging.
Содержание MultECon Series M60
Страница 1: ...1 MultECon Charger M60 Manual and warranty Made in Germany ...
Страница 28: ...28 Declaration of conformity ...