5
STEP #3 – SMALL FRAME
BB (x24)
Flat Washer M6
KK (x12)
Screw M6 x 15mm
DD (x4)
Screw M6 x 55mm
EE (x4)
Nut M6
FF (x8)
Screw M6 x 40mm
1. Attached Small Top Tilting Pole (3E) to Center Fitting (3F), tighten with Screw (DD), Flat Washer (BB) and Nut (EE).
( Fig.7.1)
2. Attach the other end of Small Top Tilting Pole (3E) to Small Top Tilting Pole (3E) ,connect Small Top Tilting Pole(3E)
and Small Top Connector (2G) by Screws (KK) and Flat Washer (BB). (Fig 8.2)
3. Connect Top Short Connectors Left (2E) and Right (2F),Top Long Connectors Left (2C) and Right (2D) to Top Straight Poles
(2B) and Top Tilting Poles( 2A) by using Flat Washer (BB) and Screw (KK) (Fig 6.1,Fig 6.2) (Note: UP label should be facing up)
