3
Tools Required For Assembly (not included):
Phillips screwdriver
Hammer
Drill
Ladder (minimum 8.2 ft / 2.4 m)
Item Identification
For ease of identification, all parts are labeled to correspond to the step number in which the part is used. The Gazebo is designed to be
constructed in 6 main steps as outlined below.
STEP #1 – RAIN GUTTER
LL (x8)
Bolt M6 x35mm
BB (x36)
Flat Washer M6
CC (x8)
Screw M6 x 15mm
KK (x20)
Screw M6 x 15mm
WW (x2)
Wrench M6
1. Insert Left Rain Gutter (1A) into Right Rain Gutter (1B),tighten with Screw (KK) and Flat Washer BB. (Fig.1) Note: Do not
tighten the other side.
2. Insert 1 of the rest Left Rain Gutter (1A) into baffle on assembled Right Rain Gutter(1B),tighten with Bolt (LL) and Flat
Washer (BB) .(Fig. 2)
3. Connect Straight Pole Connector (1C) with assembled Left Rain Gutter (1A) and Right Rain Gutter (1B), tighten with Flat
Washer (BB) and Screw (CC). (Fig 3)
