7
STEP #5 – ROOF PART 1
KK (x80)
Bolt M6 x 15mm
FF (x8)
Screw M6 x 40mm
BB (x88)
Flat Washer M6
3. Attach assembled Column Top (6D) to Left Rain Gutter (1A) and Right Rain Gutter (1B), tighten with Bolt (AA) and Flat Washer
(BB). (Fig 10.1)
4. Attach Tilting Pole Connector (1D) to Column Top (6D), tighten with Bolt (KK) and Flat Washer (BB). (Fig 10.2)
5. Attach L-Shaped Cover (6E) to Column Top (6D), tighten with Bolt (KK) and Flat Washer (BB). (Fig 10.3)
6. Place the Stakes (GG) through the Column Base (6B) into the ground (Fig 11.1)
7. Drill 4 holes (
∮
10*80MM(min)) into the ground with a percussion drill. Align the Column Base (6B) with the
drilled holes and fasten with the Expansion Bolt (QQ).(Fig 11.2)
For Set Up on Soft Ground
For Set Up on Hard Ground
