Page
5
Fig.8:
Insert Inclined Beam of Small Top (L) into
the Small Connector (N).
Fig. 7
Fig. 8
Fig.7:
Insert Long Middle Beam (H) and Short Middle
Beam (I) into Big Connector (K), to fix Middle Beam
(H,I) on the Middle Connector Link Part (D) with Bolt
(CC), Washer (BB) and Nut (DD). Put Big canopy on
the top, do not open Big Canopy.
Fig.9:
Put Small canopy (P) on the Small Top, and then
insert Inclined Beam of Small Top (L) into Small canopy
(P). Assemble Decorating Part (O) on the Small
Connector (N).
Fig.10:
Attached Small Top onto the Big Top, to
insert Inclined Beam of Small Top (L) into
Inclined Beam (G).
Fig. 9
Fig. 10
Fig.11:
Insert Bottom of Inclined Beam (J) into corner of
Big Canopy (Q).
Fig. 11
Fig. 12
Fig.12:
Hang Mosquito netting (R) on the Mosquito
Pipe (E, F) by Mosquito Netting Hook (GG).
