Page
4
Fig. 1
Fig. 3
Fig.2
Fig. 4
Fig.1:
Link Long angle beam 1 (B1) and Long angle
beam 2 (B2) with Bolt (AA), Washer (BB) and Nut (DD),
repeat this step for Short angle beam 1 &2 (C1, C2)
Fig.2:
Attached Angle Beam (B1, B2, C1, C2) onto Post
(A) with Bolt (EE) and Washer (BB)
Fig.3:
Tighten Long Mosquito Pipe (E) onto Long angle
beam (B1 & B2) with Bolt (AA) and Washer (BB),
Tighten Short Mosquito Pipe (E) onto Short angle beam
(C1 & C1) with Bolt (AA) and Washer (BB),
Fig.4:
Fix Middle Connector Link Part (D) on
Angle Beam with Bolt (AA) and Flat Washer
(BB), as Fig.4
Fig. 5
Fig. 6
Fig.5:
Insert Inclined Beam (G) into Big Connector (K),
then rotate Hook onto Big Connector (K). Insert Bottom
of Inclined Beam (J) into Inclined Beam (G).
Fig.6:
Fix Bottom of Inclined Beam (J) onto
Post (A) with Bolt (AA), Washer (BB) and Nut
(DD), to tighten Bolts.
