background image

Page

 

2

 

Cautions: 

1. Keep all children and pets away from assembly area. Children and pets should be supervised when they are in 

the area of gazebo construction. 

2. The area for assembly should not be less than 6 feet from any obstruction such as fence, garage, house, 

overhanging branches, laundry line or electrical wires. 

3. For your safety, Do not assemble this item alone. Two people are recommended for safe assembly. 

4. Some parts may contain sharp edges. Wear protective gloves if necessary during assembly. 

5. When assembling and using this product, basic safety precautions should always be followed to reduce the 

risk of personal injury and damage to equipment. Please read all instructions before assembly and use. 

6. For outdoor use only. Install on level ground. Do not cook inside the tent. 

7. Check all bolts for tightness before and during usage 

8. Pegs supplied must be used to hold this gazebo in place when upright. 

9. Warranty does not cover damage due to extreme weather conditions. 

10. Do not use candles, matches or open flames of any kind in or near a tent. 

11. Build campfires downwind and several meters away from a tent and be sure to fully extinguish campfires 

before leaving a campsite or before retiring for the night. 

12. Exercise extreme caution when using fuel-powered lanterns or heaters inside a tent and use 

battery-operated lanterns whenever possible. 

13. Extinguish or turn off all lanterns before going to sleep. Do not smoke in a tent. 

14. WARNING: KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS TENT FABRIC. This tent is made 

with fabric that meets CPAI-84 specifications for flame resistance. It is not fire proof. The fabric will burn if left 

in continuous contact with any flame source. 

 

Assembly Instructions: 

Our clear, easy-to-follow, step-by-step instructions will guide you through the project from start to finish. The final 

product will be a quality piece that will go together smoothly and give years of enjoyment.

 

 

All you will need is a screwdriver, a hammer and two ladders of at least 8 feet (2.5 m) high (not included). 

Parts identification: For ease of identification, all parts are labeled to correspond to the Step number in which the 

part is used. 

 

 

 

 

 

 

 

 

 

 

 

 

   

 

 

 

Hardware Pack 

AA 

M6x15 Bolt 

32PCS 

 

BB 

M6 Flat Washer 

72PCS 

 

CC 

M6x35 Cross Bolt 

8 PCS 

 

DD 

M6 Nut 

16 PCS 

 

 

 

EE 

M6x20 Bolt 

8 PCS 

 

FF 

Wrench 2PC 

 

GG 

Mosquito Netting Hook 

8PCS 

 

HH 

Dia. 8 X 180 Stake 

32PCS 

 

Содержание L-GZ933PST







Отзывы: