sunjoe SWJ701E Saw Joe, Руководство оператора

Страница: 18 / 24

18
Guide Bar Maintenance
When the guide bar shows signs of wear, turn it over on the
saw to distribute the wear for maximum bar life. Feathering or
burring of the bar rails is a normal process of bar wear. You
should smooth such faults with a file as soon as they occur.
Replace a bar with any of the following faults:
• Wear inside the bar rails permitting the chain to lay over
sideways
• Bent guide bar
• Cracked or broken rails
• Spread rails
Turn the saw over, check the underside of the guide bar, and
make sure that the lubrication holes and chain groove are free
from impurities.
You can purchase replacement parts for your Sun Joe
®
SWJ701E electric chain saw by ordering online at snowjoe.
com or, to order by phone, contact Snow Joe
®
+ Sun Joe
®
customer service at 1-866-SNOWJOE (1-866-766-9563).
Chain Sprocket
Regularly check the condition of the sprocket and replace it
when wear exceeds 0.5 mm (Fig. 23).
Do not mount a new chain with a worn sprocket or vice-versa.
Storage
After every work session, clean the machine thoroughly to
remove all dust and debris and slide the bar sheath over the
cutting bar. Repair or replace any faulty parts on the unit.
Store the machine in a dry, locked place out of the reach
of children.
Support
If your Sun Joe
®
SWJ701E electric chain saw requires service
or maintenance, please call 1-866-SNOWJOE
(1-866-766-9563) for assistance.
Model and Serial Numbers
When contacting the company, reordering parts or arranging
service from an authorized dealer, you will need to provide the
model and serial numbers, which can be found on the decal
located on the housing of the unit. Copy these numbers into
the space provided below.
< 0,5 mm
Fig. 23
Record the following numbers from the housing or handle of your
new product:
Model #:
Serial #:
S W J 7 0 1 E
Chain Maintenance Table
62
3/8
inches mm
Drive Links Chain Pitch Chain Gauge
File Diameter
inches
mm inches mm
9.5 0.050 1.3 4 5/32