background image

20

Optional Accessories

m

WARNING!

 ALWAYS use only authorized Snow Joe

®

 + Sun Joe

®

 replacement parts and accessories. NEVER use 

replacement parts or accessories that are not intended for use with this saw. Contact Snow Joe

®

 + Sun Joe

®

 if you are unsure 

whether it is safe to use a particular replacement part or accessory with your saw. The use of any other attachment or accessory 

can be dangerous and could cause injury or mechanical damage.

NOTE: 

Accessories are subject to change without any obligation on the part of Snow Joe

®

 + Sun Joe

®

 to provide notice of such 

changes. Accessories can be ordered online at snowjoe.com or via phone by contacting the Snow Joe

®

 + Sun Joe

®

 customer 

service center at 1-866-SNOWJOE (1-866-766-9563).

(

18-Inch Guide Bar

18-Inch Cutting Chain

Bar and chain oil

SWJ-18BAR

SWJ-18CHAIN

SWJ-OIL 

 

(sold at snowjoe.com or you 

can purchase equivalent bar 

and chain oil sold at your local 

hardware store)

Model

Accessories

Item

1

2

3

R

Snow Joe

®

 + Sun Joe

®

 SJTW-A 14-gauge 

50-foot extension cord with lighted end

PJEXT50-B

4

Содержание SWJ701E Saw Joe

























Отзывы: