background image

7

Unpacking

Carton Contents

•  Cordless air compressor
•  Air hose
•  Accessory pack
•  Wrench
•  40 V EcoSharp

®

 battery

•  EcoSharp

®

 battery charger

•  Manuals with registration card

1.  Carefully remove the cordless air compressor and check 

to see that all of the above items are supplied.

2.  Inspect the product carefully to make sure no breakage or 

damage occurred during shipping. If you find damaged or 

missing parts, DO NOT return the unit to the store. Please 

call the Snow Joe

®

 + Sun Joe

®

 customer service center at 

1-866-SNOWJOE (1-866-766-9563

).

  NOTE: Do not discard the shipping carton and packaging 

material until you are ready to use your new cordless 

air compressor. The packaging is made of recyclable 

materials. Properly dispose of these materials in 

accordance with local regulations.

IMPORTANT! The equipment and packaging material are  

not toys. Do not let children play with plastic bags, foils, 

or small parts. These items can be swallowed and pose a 

suffocation risk!

Assembly

m

WARNING!

 To avoid serious personal injury, read and 

understand all safety instructions provided.

Attaching the Air Hose

1.  Pull the air outlet coupler backwards, and insert the air 

hose in (Fig. 1).  

2.  Release the coupler, the air hose will be secured in the air 

outlet (Fig. 2).  

3.  To remove the air hose, pull the air outlet coupler 

backwards and pull out the air hose. 

Battery Pack Operation

The equipment is powered by a lithium-ion battery. The battery 

pack is completely sealed and maintenance free.

Battery Charge Level Indicator

The battery pack is equipped with a push button for checking 

the charge level. Simply press the push button to read off the 

battery charge level from the LEDs of the battery indicator:

•  All 3 level monitoring LEDs are lit: Battery charge level 

 

is high.

•  2 level monitoring LEDs are lit: Battery charge level is 

decreasing. Stop work as soon as possible.

•  1 level monitoring LED is lit: Battery is flat. Stop work 

IMMEDIATELY and charge the battery. Otherwise the 

battery’s service life will be greatly shortened.

NOTE: If the charge level button does not appear to be 

working, place the battery pack on the charger and charge as 

needed.
NOTE: Immediately after using the battery pack, the charge 

level button may display a lower charge than it will if checked 

a few minutes later. The battery cells “recover” some of their 

charge after resting.

Fig. 1

Air outlet

Air hose

Coupler

Fig. 2

Release the 

coupler

Charge level button 

The battery is at 30% capacity 

and requires charging

The battery is at 60% capacity 

and requires charging soon

The battery is at full capacity

Light Indicators

Lights

Содержание iONAIR





















Отзывы: