background image

Safety Symbols

The following table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all 

instructions on the machine before attempting to assemble and operate.

READ THE OPERATOR'S 

MANUAL(S) – Read, understand 

and follow all instructions in the 

user manual(s) before attempting 

to assemble and operate.

SAFETY ALERT – Indicates a 

precaution, a warning or a danger.

WARNING!

 Do not expose the unit 

to rain or wet conditions.

Keep bystanders and children  

a safe distance away.

Symbols

Symbols

Descriptions

Descriptions

RISK OF PERSONAL INJURY. 

Never spray compressed air or 

material at self or others.

RISK OF BURNS. Do not touch the 

pump, the manifold or the transfer 

tube while the compressor is running. 

Allow the parts to cool down before 

handling or servicing. 

RISK OF FIRE OR EXPLOSION. 

Do not spray a flammable or 

combustible liquid or paint near 

sparks, flames, pilot lights or in a 

confined area. The spray area must 

be well-ventilated. Keep compressor 

at least 20' (6 m) away from spray 

area. Never smoke when spraying.

Indoor use only. Only use battery 

charger indoors.

RISK OF BURSTING. Make sure 

the regulator is adjusted so that the 

compressor outlet pressure is set 

lower than the maximum operating 

pressure of the spray gun or tool. 

Before starting the compressor, pull 

the ring on the safety valve to make 

sure the valve moves freely. Drain 

water from tank after each use. Do not 

weld or repair tank.

Wear hearing protection. 

Wear eye protection. 

Wear breathing protection.

5

Содержание iONAIR





















Отзывы: