Sunix DevicePort Series, Руководство пользователя

Страница: 46 / 51

45
4. How to install COM port on my system?.
Answer:
SUNIX DevicePort® supports Ethernet hot-plug and system auto-detect capability, user
can expand RS-232 COM and LPT port easily. After driver installed ready at the first time,
plug RJ45 Ethernet cable between SUNIX DevicePort
®
and PC host side, system will
create physical COM/LPT ports automatically with real time data transmit and receive
communication. User can easily access port by using existing software and application.
DevicePort® runs procedure as below.
Ethernet Connection ready > DevicePort® detecting > Port Mapping
5. Should I install driver for each DevicePort® boxes when Multiple DevicePort®
daisy chain network.
Answer:
Driver install required only at the first time. So you do not need to re-install driver again
for your second level DevicePort® connection.
6. How to expand more than 12 COM ports by using DevicePort® ?
Answer:
SUNIX DevicePort® daisy chain network topology limits maximum 4 DevicePort® boxes
or 12 COM ports expansion in one windows based PC system. If you need more than 12
COM ports for your system, please contact with us for 16 or 32-port DevicePort® models.
7. Could I connect DevicePort® Dock mode to switch hub or AP routers?
Answer:
Yes, you can, however we do not recommend.
If DevicePort® Dock mode connects to public switch hub or router, there are somebody
may connect to this DevicePort® without your expecting. Second, to prevent on-line spy
recording, DevicePort® Dock mode limits specific Ethernet port connection to PC host. If
you want to do so, please refer to SUNIX DevicePort® Advanced mode model.