Sunix DevicePort Series, Руководство пользователя

Страница: 12 / 51

11
1.6 Product Specifications
Serial Communication
Ethernet Communication
Power Requirements
Driver Support
Interface RS-232 Baud rate
50bps ~115.2Kbps
(Optional for 921.6Kpbs)
Controller SUNIX DPL2000Q Stop bit 1, 1.5, 2
BUS Ethernet Parity
even, odd, none,
mark, space
No. of Port
2 or 4-port
(Product Dependent)
Flow Control Xon/Xoff (software)
FIFO 1Kbyte Hardware / per port Connector DB9 Male
Signal DCD, TxD, RxD, RTS, CTS, DTR, DSR, GND, RI
Protection
±15KV ESD IEC6000-4-2 Air Discharge
±8KV ESD IEC61000-4-2 Contact Discharge
±4KV ESD IEC61000-4-2 Level2 Line-to-Line
Number of Ports
2-port
(*Note 1)
Upstream to Ethernet Switch
Downstream to PC Host
Speed 10/100 Mbps, auto MDI/MDIX
Connector RJ45
Magnetic Isolation Protection 1.0K Built-in
Input Voltage +5VDC
Output Powered COM Capacity +5VDC / Maximum 750mA / each port
Over Current Protection 1.1A PTC fuse for each power signal
Power Consumption 2.5W @ 5VDC (board only without power output to serial device)
Connector DC-Jack
Microsoft Client XP / 7 / 8 / 8.1 / 10 (X86/X64)
Microsoft Server 2003 / 2008 / 2012R2 (X64)