Sungrow SunBox PVS-8M, Руководство пользователя

Страница: 25 / 46

User Manual 4 Installation Guide
21
section), see the following figure.
Step 7
As shown in the following figure, connect the terminal to the corresponding
terminal of the combiner box.
Notice: press the bolt to the side with indentation during fixation. Make sure the
terminal is inserted into the combiner box as much as possible.
Step 8
Wiring: Press fit the cable with insulation layer stripped on the terminal at
bottom of the fuse box.
The cable connection of the upper layer is shown in the figure below (take the
connection method of the positive input for example)
−
Cable connection method of the lower layer is shown below.
Step 9 Follow the same procedure to connect rest cables. Comb all the input cables
together with cable ties and firm them onto the cable support bar.
Appropriate cable bending space shall be ensured.