Sungrow SunBox PVS-8M, Руководство пользователя

Страница: 26 / 46

4 Installation Guide User Manual
22
Fig. 4-5 Diagram of cabling route
4.3.5 Output wiring and connections
Step 1
Lift the protective cover upwards. Then loosen the nut from water-proof
terminals.
Step 2
Insert the “DC+” cable through “DC Output (+)” terminal. Enough cable
bending space should be ensured.
Step 3 Strip off both protective and insulating layers with the help of a hand
crimping pliers. The length of cable conductor shall be approx. 35mm.
Step 4 Connect cable conductor to certain DT terminal.
For PVS-8M, 50mm 2 terminal.
For PVS-12M, 70mm
2
terminal.
For PVS-16M, 90mm
2
terminal.
Step 5
Insert the DT terminal, and tighten the nut by using an inner hexagon
spanner. Firm cable onto the cable support bar. Appropriate cable bending
space shall be ensured.