Sungrow SunBox PVS-8M, Руководство пользователя

Страница: 19 / 46

User Manual 4 Installation Guide
15
Install PVS upside down is strictly forbidden.

Wall-mounted: fix PVS to the PV array’s installation frame through the mounting
holes of the PVS by 2 or 4 M10×30 bolts

Column-mounted: use hold hoop and steel angle as fixture to fix to the support
column. fix PVS to the steel angle through the mounting holes of the PVS by 2 or
4 M10×30 bolts
Installation steps:
Step 1
Measure the distances of the two hangers of the PVS.
Step 2 Mark positions according to the distances measured on the installation
surface and then drill holes.
Step 3
Fix the PVS to the surface according to the sequence of bolt, PVS hangers,
installation surface, flat washer, spring washer and nut. Torque:18N.m.
Column-mounted steps:
Step 1
The dimensions of the installation holes on the PV cell frame should meet the
requirements in Fig. 4-2.