11
Refer to “Protection Parameter Setting” in User Manual for country code explanation.
If the inverter is installed where the country code is not included, please choose
item “Other” and manually set the protection parameters.
Step 6
If the country code set as GR, a Grid
codes page as shown in the right will
appear.
Press
to select grid code and
press
ENTER
to confirm.
If the country code set as DE, a Grid codes page
as shown in the right will appear, where LV
signifying low-voltage grid; MV signifying
medium-voltage grid.
Press
to select grid
code and
press
ENTER
to confirm.
If the country code set as TK, a Grid codes page
as shown in the right will appear.
Press
to
select grid code and
press
ENTER
to confirm.
If the country code set as TH, a Grid codes page
special for Thailand will appear.
Press
to
select grid code and
press
ENTER
to confirm.
After setting the Country parameter, please proceed to set other
parameters of the inverter in accordance with the specific requirements
of the local grid. Before commissioning, please check thoroughly if the
set parameters meet the local grid requirement.
