2
1.2
Converter
Electric shock risk!
•
Make sure that the external casing of the chassis is intact and closed to keep
the operators and their properties safe from harm or injury. Please do not
open the external casing of the converter when the converter is working or
connected, otherwise Sungrow Power Supply Co., Ltd. shall not be held liable
for related consequences.
Risk of damage to converter or personal injury!
•
Do not plug in or unplug the DC connector when the converter is working.
•
Even when the converter is disconnected, the voltage inside is still high. Wait
at least five minutes before you handle the converter.
All safety instructions, warning labels, and nameplate on the converter:
•
Must be clearly legible.
•
Should not be removed or covered.
Risk of burns due to hot components!
Do not touch any hot parts (such as heat sink) during operation. Only the DC
switch can safely be touched at any time.
The parameters of the converter must be configured by qualified technical per-
sonnel according to the standards of the local power grid.
Do not touch the printed circuit board or other electrostatic sensitive compo-
nents as you may damage the device.
•
Do not touch the circuit board unnecessarily.
•
Observe the regulations to protect against electrostatic and wear an anti-
static wrist strap.
User Manual
