Sungrow MVS6250 Скачать руководство пользователя страница 8

Страница: 8 / 65

1 About This Manual

System Manual

DANGER indicates a hazard with a high level of risk which, if not avoided, will result in
death or serious injury.

WARNING indicates a hazard with a medium level of risk which, if not avoided, could
result in death or serious injury.

CAUTION indicates a hazard with a low level of risk which, if not avoided, could result in
minor or moderate injury.

NOTICE indicates a situation which, if not avoided, could result in equipment or property
damage.

NOTE indicates additional information, emphasized contents, or tips to help
you solve problems or save time.

The symbols below may be pasted on the electrical parts of the MV Station or its internal
device. Make sure to read the following symbols and fully understand them before installing
the equipment.

Symbol

Explanation

Lethal voltage inside! Do not touch!

Hot surface! Do not touch the hot surface of the device.

Protective earth. Earthing securely to ensure personal safety.

Содержание MVS6250


































































Результаты поиска

Содержание MVS6250

Отзывы:

Похожие инструкции для MVS6250

Бренды по названию

Популярные бренды

Sungrow MVS6250, Руководство по транспортировке и установке

Результаты поиска

Содержание MVS6250

Отзывы:

Похожие инструкции для MVS6250

Бренды по названию

Популярные бренды