Sungrow MVS6250 Скачать руководство пользователя страница 12

Страница: 12 / 65

2 Safety Instructions

System Manual

2.5

Voltage-free Operations

Perform operations on the MV Station only when all devices inside the MV Station are
completely voltage-free.



Avoid any inadvertent re-connections.



Verify that no voltage or current is present with appropriate testing devices.



Ground and short-circuit whenever necessary.



Cover possible live parts to avoid inadvertent touch.



Ensure sufficient escape room.



After the MV Station stops, wait at least 5 minutes before operating it.



Ensure that the MV Station is completely voltage-free.

2.6

ESD Protection

Devices may be damaged irreversibly by electrostatic discharge (ESD).



Avoid unnecessary touching of the PCB.



Observe all the ESD-related safety instructions. Wear proper personal protective
equipment (PPE) such as wrist strap.

2.7

Symbols on the Device Body

Symbols on the device contain important information on safe operations of the MV Station
and its internal devices. Do not tear or damage them!

Do not damage or tear the symbols.



All symbols on the device body must be clearly legible.



Replace the symbols once any damage or illegibility is detected.

2.8

Safety Warning Signs

During transport, installation, maintenance, and troubleshooting of the MV Station, keep
unauthorized persons away.

Содержание MVS6250


































































Результаты поиска

Содержание MVS6250

Отзывы:

Похожие инструкции для MVS6250

Бренды по названию

Популярные бренды

Sungrow MVS6250, Руководство по транспортировке и установке

Результаты поиска

Содержание MVS6250

Отзывы:

Похожие инструкции для MVS6250

Бренды по названию

Популярные бренды