Sapphire Series 1100 & 1100EC
Operating Instructions:
1)
Remove standard mattress from the bed.
2)
Replace standard mattress with the Sapphire Series 1100 or 1100EC
mattress. (Be sure air tubing is at the foot end of the bed.)
3)
Strap air support mattress to bed frame on all four sides.
4)
Place control unit on the footboard of the bed using the two
retractable hooks located on the back of the unit. (If no footboard is available, put blower
on the floor away from traffic.) To avoid blocking the air intake,
DO NOT
lay control unit on its back.
Air Tubing
Connection
CPC
5)
Attach the air tubing to the blower unit, being sure it snaps in tight.
(Be sure air tubing is not kinked and is unobstructed.)
6)
Plug unit into grounded A/C 110 volt outlet.
7)
Turn master power switch, located on the side of the unit, on.
8)
At this time the control unit will automatically go into static mode.
9)
Press the Autofirm button for quick inflation.
10)
Placed the patient on the bed
after
inflation to insure the air cells do not become twisted
or kinked.
11)
To get the control unit out of Autofirm mode, press Autofirm button again.
12)
Static Mode
a.
Press the Static Mode button
b.
Set the desired comfort level with the Soft/Firm buttons
5
