background image

Frequently Ordered Parts

 

 

The following is a list of parts that are frequently ordered for self replacement and repairs.  To 
aid you in ordering parts, please use the provided product numbers given below for each part.  
The replacement of some parts not listed here may require sending in the unit to the 
manufacturer for repairs.   
 
 
 
 
 
 
 

Product # 

95071 

 
 
 
 
 
 
 

Product # 

96065 

Black Connector

 – 

Connects from mattress 
to blower unit side panel.  
Allows air movement to 
inflate mattress.

Filters

 – Removes dust 

and other particles from 
the air as it is pulled into 
the blower unit. 

 

Product # 

96066 

 
 
 
 
 
 

Product # 

96064 

Male CPC (Chrome)

 –

Attached to blower unit 
side panel.  Connects to 
Female CPC to remove 
exhaust air from unit to 
mattress. 

Female CPC

 – Connects 

from mattress to Male 
CPC on blower unit.  
Removes exhaust air 
from unit to mattress. 

 
 

Product # 

95031 

 
 
 
 
 
 

Product # 

96055 

Power Cords 
(removable and fixed)

 – 

Grounded power cord for 
providing power to the 
blower unit. 

Hooks 

– Collapsible 

hooks that allow the unit 
to be hung on bed frame. 

 
 

Product # 

N/A 

 

Brackets 

– Attach the 

hooks to the bottom case 
of the unit. 

 
 
 
 
 
 
 
 

10 

Содержание SAPPHIRE 1100












Отзывы: