Physical Dimensions
All dimensions have a tolerance of +/- 2 mm
Liability Limitation
Sunflare is not in control of the installation of the
module and hence does not accept responsibility
nor liability for damages arising from improper
use, incorrect installation, operation, or
maintenance of the product.
The information provided by this manual is based
upon Sunflare’s knowledge and understanding
and is believed to be correct and reliable.
However, the customer is responsible for the
installation, operation and maintenance of the
product and any damage that might occur to
the product or the roof as a consequence of
those activities even if the customer followed
guidelines and descriptions set forth in this
manual. Sunflare takes no responsibility for
material incompatibility between Sunflare
components and non-Sunflare components, nor
to any roofing products with which they may
come in contact.
Sunflare accepts no liability for: damages,
financial losses of any kind, business
interruptions, or lost earnings, whether they be
direct or incidental, as a result of the use of the
information contained in these instructions, and
whether or not they are based upon Sunflare’s
negligence.
No suggestions, recommendations, power
ratings, or any other guidance set forth in this
document constitutes an expressed or implied
warranty. Product warranties are not made in this
document. Warranties are included in a separate
warranty document, or through purchase
agreements.
Revision History
Document
Sunflare_PowerFit20_Installation_instruction_V1
Sunflare_PowerFit20_Installation_instruction_V2
Sunflare_PowerFit20_Installation_instruction_V3
Date of Revision
06/07/2021
07/08/2021
09/20/2021
Contact Information
Sunflare Co.
1693 Yeager Avenue
La Verne, CA 91750 USA
Tel: 1-888-577-9935
Email: [email protected]
Web: www.sunflaresolar.com
13
1693.36±2 mm
[66.7±0.1 in]
354.0±2 mm
[13.9±0.1 in]
