12. Change the visor
2020-10-06
OI03H-1021 SR 200 Airline
17
12.1
The visor is mounted in
a groove running around the
visor opening of the outer
mask and is held in place by
one upper and one lower
frame half.
Use a 2.5 mm Allen key to
remove the two screws
holding the frame halves
together.
12.2
Carefully remove the
upper frame half.
Carefully prise the top part of
the mask off the visor and
remove the visor from the
lower groove.
12.3
Take this opportunity to
clean the groove, if necessary
Change a glass visor, SR 365
Take great care to ensure that the visor is located accurately so that
the centre markings on the visor, frame and mask are in line.
This will prevent subjecting the visor to stresses that could lead to its
damage. To make assembly easier, it is important that the grooves in
the mask and frame should be abundantly coated with a rich soap
solution or with a similar liquid.