x
Automatic tension adjustment systems need adjustment once prior to operation.
x
Use of small V-belt cross section for high belt speeds is recommended.
x
Avoid selection of V-belts that operate near their speed limit.
x
Acceptable Blower Drive Arrangement Options
The driver should be mounted on the inlet side of a vertical unit (horizontal piping) and
on the side nearest to the shaft on a horizontal unit.
9.4. System Safety Equipment
To ensure safe, automatic operation of the rotary blower the user
must install safety control equipment like pressure relief valves.
9.4.1. Safety relief valve
A relief valve(s), pressure or vacuum, is necessary to prevent the rotary blower from
operating above maximum pressure differential.
-----------------------------------------------------------------------------------------------------------------------------------------------
Sunco Blowers www.suncoblowers.com
Phone: 704-545-3922 Pg. 24
All rights reserved. No part of this manual may be reproduced in any form by any
means without permission from
Sunco Blowers
